Pristatymo terminai
2026-01-06 Numatomas pristatymas užsakius dabar
Prekė užsakoma iš tiekėjo sandėlio. Jei tiekėjas šios prekės pristatyti iki nurodytos datos negalės, informuosime jus el. paštu.
 Yra | Tiekėjo sandėlis |
Pristatymas į namus
Pristatymas į namus
Perdavę prekes kurjeriui, informuosime Jus el. paštu.
Virš 70,00 € (Užsakymams iki 1000 kg) | Nemokamai |
Iki 70,00 € (Užsakymams iki 3 kg) | 3,49 |
Iki 70,00 € (Užsakymams iki 1000 kg) | 3,49 - 4,99 € |
Pristatymas į paštomatą
Pristatymas į paštomatą
Perdavę prekes kurjeriui, informuosime Jus el. paštu. Užsakymai virš 50.00 € pristatomi nemokamai.
2,39
Prekės aprašymas
26 port 24 PoE port Switch Hik-vision DS-3E1526P-SI-24P2F
Specifikacijos
SKU
U-4900265
Prekės kodas
SWITCH3E1526PSI24P2F
Tiekėjo prekės aprašymas
- 24 x 10/100/1000M PoE Ports, 2 x 100/1000M SFP
- Total PoE Power Budget 370W
- Support energy saving mode with user-configurable plans
- Support IEEE 802.1Q VLAN tagging
- Support STP/RSTP/ERPS loop prevention with storm control
- Support cable detection to locate failure
- Support SNMP, QoS, DHCP snooping, and ARP anti-spoofing
- Support 6 kV surge protection
- Approval
- ChemistryCE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006)
- EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
- SafetyCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
- General
- Dimensions (W × H × D)440.0 mm × 44.0 mm × 220.8 mm (17.32'' × 1.73'' × 8.69'')
- Gross Weight3.73 kg (8.22 lb)
- Installation ModeRack (equipped with mounting ears)
- Max. Power Consumption400 W
- Net Weight2.81 kg (6.19 lb)
- Operating Humidity5% to 95% (no condensation)
- Operating Temperature0 °C to 45 °C (0 °F to 113 °F)
- Power Consumption in Idle20 W
- Power Supply100 to 240 V AC, 50/60 Hz, Max. 7 A
- Relative Humidity5% to 95% (no condensation)
- ShellMetal material
- Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
- Surge Protection6 kV
- Network Parameters
- Internal Cache4.1 Mbits
- MAC Address Table8 K
- Packet Forwarding Rate41.66 Mpps
- Ports24 × Gigabit PoE port,2 × Gigabit fiber optical port
- Switching Capacity56 Gbps
- PoE Power Supply
- Max. Port Power30 W
- PoE PortPoE: Ports 1 to 24
- PoE Power Budget370 W
- PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
- PoE StandardIEEE 802.3af,IEEE 802.3at
- Software Function
- ACLPort security strategy.Support up to 64 ACL entries.Support up to 128 configuration rules under all ACL entries.
- DHCP SnoopingDHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disable by default.
- HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported:1. Display the port rate.2. Display the port bandwidth utilization rate.3. Display the PoE power usage.4. Display topology information.5. Display the alarm status.6. Restart ports and devices.7. Enable port long-rage mode.8. Remotely upgrade the device.
- IPSGIPSG can control the security of port access device.Support port, MAC, IP binding.Support 256 security entries.
- Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.Support static link aggregation.Support 8 aggregation groups.
- Long RangePorts 1 to 24: up to 300 m.Long range performance may vary depend on camera model or cable condition.
- Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.Support 802.1D STP.Support 802.1w RSTP.Support G.8032 ERPS.
- PoE WatchdogPorts 1 to 24: auto detect and restart the cameras that do not respond.
- Port IsolationPorts 1 to 26: port isolation mode to improve network securityPorts in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
- Port Rate-Limiting Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
- QoSQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.Support port-based priority configuration.Support SP, WRR priority schedule mode.
- Storm ControlStorm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.Support port rate limiting based on broadcast, multicast, and unknown unicast packets.
- System MaintenanceSupport device management via web.Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.Support management via Hik-Central Pro.Support remote management via Hik-Partner Pro.Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.Supports 802.1ab LLDP for peer device discovery.Support port mirroring for fault locating.
- VLANVLAN is used for network scale planning and network health improvement.Support 802.1Q.Configurable VLAN ID from 1-4094.Support Trunk, Access port mode.Support Max. 4094 VLAN.
Tiekėjo specifikacijos
Product code
SWITCH3E1526PSI24P2F
Category
Swit
Supplier's product code
SWITCH3E1526PSI24P2F
Product ID
U-4900265
Tiekėjo pateikiama informacija apie prekę gali skirtis nuo realaus produkto. Jei pastebėjote neatitikimų praneškite apie tai el. paštu [email protected].