Fluke-1AC-E2-II įtampos indikatorius, Fluke
Pristatymo terminai
Atsiėmimas LEMONA parduotuvėje
Atsiėmimas LEMONA parduotuvėje Nemokamai
Kai jūsų užsakymas bus paruoštas atsiėmimui, informuosime Jus SMS žinute ir el. paštu. Parduotuvių darbo laiką užsakymų atsiėmimui rasite čia.
Kiekis parduotuvėje
 Nėra | Vilniaus Žirmūnų parduotuvė |
| Nėra | Vilniaus Naujamiesčio parduotuvė |
| Nėra | Kauno parduotuvė |
| Nėra | Klaipėdos parduotuvė |
| Nėra | Šiaulių parduotuvė |
| Nėra | Centrinis sandėlis LEZ |
Pristatymas į namus
Pristatymas į namus
Virš 70,00 € (Užsakymams iki 1000 kg) | Nemokamai |
Iki 70,00 € (Užsakymams iki 3 kg) | 3,49 |
Iki 70,00 € (Užsakymams iki 1000 kg) | 3,49 - 4,99 € |
Pristatymas į paštomatą
Pristatymas į paštomatą
2,39
Prekės aprašymas
Key Features
- Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected
- Continuous self-test so you always know it’s working
- Voltage detection range for wide application use - 90 V to 1000 V AC or 200 V to 1000 V AC
- Audible/Silent mode for added convenience
The pocket-sized voltage detector
The portable 1AC II non-contact voltage tester from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home and even detect miswires of an electrical outlet.
The tip glows red and a beeper sounds when voltage is detected
A loud, easy to hear beeper will sound and the tip will glow red when voltage is detected
Optionally, the beeper can be disabled for use in quiet environments
Continuous self-test so you always know it’s working
When the tip blinks red you know it’s working properly
Provides a continual visual indication that the 1AC II is on
90 V to 1000 V AC or 200 V to 1000 V AC voltage detection range for wide application use
Wide voltage detection range allows for use in a broad range of applications
Also available in a low voltage model from 20 V to 90 V AC for controls circuits
Safety features
Rated to CAT IV 1000 V for added protection
CE and CSA approved
Additional tool features
Audible/Silent mode for added convenience in quiet environments
On/Off button
Batteries included
2 year warranty
Specifications: Fluke 1AC II Non-Contact Voltage Tester
|
Specifications |
|
|
Operating Principles |
Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage. |
|
Voltage sensing ranges |
Nominally, 90 V AC to 1000 V AC |
|
Detector tip style |
Flat-tip |
|
Light source |
One high intensity red LED |
|
Agency Approvals |
|
|
Safety |
IEC 61010-1: Pollution Degree 2, IEC 61010-2-030: CAT IV 1000 V |
|
EMC |
IEC 61326-1: Portable |
|
IP Rating |
IP 40 |
|
Operating Temperature |
-10°C to 50°C (-14°F to 122°F) |
|
Operating Humidity Ranges |
0% to 95% (0°C to 30°C) |
|
0% to 75% (30°C to 40°C) |
|
|
0% to 45% (40 to 55°C) |
|
|
Operating Altitude |
3000 m |
|
Cleaning |
Clean with damp cloth |
|
Batteries |
2 AAA alkaline batteries included |
|
Battery Life |
Typical battery life of greater than 1 year |
|
Warranty Period |
Two years |
|
Product does not respond to random electrostatic discharge. |
|
Naudinga informacija
Specifikacijos
Tiekėjo prekės aprašymas
Box Contents:
2 x batteries